Changing the I3 to a SC3 on the Tusken Slayer, does the board still have the saber cinema for tracks and the fx files per font? Other than less fonts what else is different from the original I3?
to tell ya the truth I'm not sure "exactly" what's different about the I3 opposed to SC3 other than fonts? (At least without losing a bunch of fonts?) The cool thing is though if you wanna switch back to I3 ya just download the zip files for free right off of saberigniter.com (just save the other folder so you don't lose the Anakin font... but about older fonts all you gotta do is swap it in to the SC3 folder and implement the "lowswing" option and it will adapt to "RealSwing"!
Speaking of which I'll be loading up a clean (non glam) video shortly of the RealSwing without the music in there
Post by darthbrooks on Jul 10, 2019 15:24:00 GMT -5
"RealSwing" for Tusken Slayer raw vid
I was gonna do a SmoothSwing RealSwing comparison vid but I don't have an installed Proffie saber st the moment. And also should note due to the size of the Tusken Slayer the speaker in there isn't as loud as other sabers so it may not come across nearly as well on my phone camera as I would've liked to demo unfortunately
Great sabers man! I thought you loved that Dooku! If I didn’t already have two sabers with Space Windu I’d be all over that Tusken Slayer! Good luck with the sale. 🙂
yes sir! I do absolutely LOVE that Dooku! The truth is my wife and have been "talking" and she's convinced me that I don't need 12 or 16 lightsabers🤣
But I did convince her that "I do", need 3-4 unbelievable ones!😂🤣
So I'm not out or done by any means and it was NOT easy to decide which ones to sell but at the end of the day I feel I made the right choices...
It also should be noted to whomever is interested in the Dooku, that when using (spectrum) the odd highly mixed colors USE A TON OF POWER FAST solid colors no issues at all so unless it is FULLY charged some of those mixed colors like turquoise or the like hot pink, may cause some cracking noises could be the wiring not 100% sure but Red, Green, Blue, even Purple and the like no issues at all... I'll make a note up top
Post by darthbrooks on Jul 20, 2019 18:00:01 GMT -5
Tusken Slayer Sold
UW Dooku Sold
Obi Arena Sold
4 Tier Stand Sold
Rudy v3 - $400
Roman Props MPP - $125
Watto's Pariahs Ventress pair with coupler (run spot) $1050 (PRICE DROP) - 3rd payment due soon...
Solos Hold Ahsokas Snips Saber and Rogue Aprrentice. Korbanth Run Spot available (BELOW COST - Costs will go up after presale per korbanth)
2 neopixel blades 2 sabers proffie installed with Goth 3D chassis Cost for both together: $1050 SHIPPED! "Goods and Services" Korbanth is aware of this sale and name and shipping addresses will be changed immediately after sale... THIS IS A BEAR MINIMUM OF $40 LESS THAN ONSITE
Post by darthbrooks on Aug 11, 2019 13:54:12 GMT -5
Big price drop(s)
SH neo proffie Ahsokas (with blades) $1050 Goods and Services (SHIPPED - I'll pay PayPal Fees)
Watto's Junkyard (Ventress) Pariahs with coupler, vented and non vented pomme(s) $1050 (SHIPPED I'll pay PayPal Fees) One more payment due to Watto's Junkyard of "approximately" $380 or so soon... (name and address changes to both of these will be changed within minutes of purchase)
Any questions or concerns please PM this is ONE HECK OF A DEAL FOLKS!!! Don't pass on these spots and pay WAY more later
jedipadawanmelissa: sorry for the wait I'm ok, still with the lightside
Sept 13, 2020 21:34:04 GMT -5
megtoothsith: Don't be let the lightside corrupt you Melissa!
Sept 14, 2020 12:15:31 GMT -5
jedipadawanmelissa: I know I must have a stable balance of light and dark
Sept 14, 2020 13:32:58 GMT -5
Nerf Herder: Heads up TRA. The forum is having intermittent technical issues with messaging. If you send out private correspondence, double check that it's delivered and shows up in your message feed. Mtfbwy.
Sept 15, 2020 13:24:26 GMT -5