I'm trying to wire up a Sabercore Viridian-Crimson fusion board I got from makeyourownchip.com with a combo button/recharge PCB from Darkwolf studios. The wiring diagram for the board is clear enough but for the life of me I can't figure out how the K+ L+ and Ch+ Ch- of the combo PCB equate to the switch and recharge pads of the board?? I've tried all iterations of swapping I could think of with no success. I tried to contact the seller directly but have never received a response. Which is how I ended up here. I'm hoping you all here can help, thanks so much.
Last Edit: Apr 10, 2021 16:30:43 GMT -5 by primagenia
Well this is a tricky one. That switch board might not work with a sabercore. Its possible. Darkwolf sabers / saberstudio made the switch board. Saberforge may also be able to help. Since they sell the sabercore. That being said K+ is "key" or in our vernacular switch. L+ is for the switch LED. That's where things get Tricky. The switch board is designed for the saberstudio boards. Its probably designed such that K- and L- are bundled with CH- to return everything to ground (PWR-). Unfortunately sabercore doesn't label which switch pad is positive, it might also not return the negative swith pad directly to ground. So it might not work at all. Your best bet is to buy a Switch and Recharge port yourself from the custom saber shop, and wire them directly
vargose: Verso $45, Sabercore $30, DIYino $30, Golden Harvest $60, Proffie $45, CFX $85. Do you remember when the days when the Crystal focus was $150? Gotta love the sheer availability of options now.
May 17, 2021 9:31:59 GMT -5