|
|
Post by Turgon on Aug 16, 2013 16:19:28 GMT -5
How many LE slots are remaining? These are by far my favorite plugs. I also need to phone about a custom plug for Bloodshine.
|
|
|
|
Post by Darkside Engineering on Aug 17, 2013 18:20:40 GMT -5
Hey everyone just wanted to let you all know I am currently working on all of the limited edition plugs right now, some of them have already shipped out and the rest of them are in progress so they will all be finished up real soon here 
|
|
|
|
Post by Pfockerchief on Aug 18, 2013 21:06:06 GMT -5
Awesome news! Can't wait for these.
|
|
|
|
Post by Yoran khoor on Aug 20, 2013 10:07:43 GMT -5
HI.
I have a need for a blade plug that will house a stunt carbon blade ( the ones from Ryan's wed site).
It need to fit snugly and have some sort of shock/vibration absorber material wrapping it ( ducktape, silicone paste work very well indeed, the one used to seal around bath tub and sink)
I still need to get the measurements but I d like to discuss the design and if /how it can be done.
I 'd like maybe to be able to screw the blade IN the plug and find a way to lock firmly the plug in the saber ( any saber, not only empty stunts maybe?)
It will be for choregraphed fights so full speed but controled ( i'm trying my hands on the rotoscoping system and such for fan movie
And I will get I think 2 R2TD plugs but I still need to measure diam and lengh.
I ll let you know.
Question, where are the designs of the special version you re mentioning?
Pm me your ideas since well, you re the craftsman and I know nothing ^^
Thanks!
Y
|
|
|
|
Post by jedicri on Aug 20, 2013 10:29:12 GMT -5
HI. I have a need for a blade plug that will house a stunt carbon blade ( the ones from Ryan's wed site). It need to fit snugly and have some sort of shock/vibration absorber material wrapping it ( ducktape, silicone paste work very well indeed, the one used to seal around bath tub and sink) I still need to get the measurements but I d like to discuss the design and if /how it can be done. I 'd like maybe to be able to screw the blade IN the plug and find a way to lock firmly the plug in the saber ( any saber, not only empty stunts maybe?) It will be for choregraphed fights so full speed but controled ( i'm trying my hands on the rotoscoping system and such for fan movie And I will get I think 2 R2TD plugs but I still need to measure diam and lengh. I ll let you know. Question, where are the designs of the special version you re mentioning? Pm me your ideas since well, you re the craftsman and I know nothing ^^ Thanks! Y Limited Edition Plug: imperialroyalarms.com/thread/2156/limited-edition-razor-blade-plug |
|
|
|
Post by Yoran khoor on Aug 20, 2013 17:17:23 GMT -5
And about my needs for a special plug to put a carbon blade in it?
PM me if yopu can help me, I just need 4 of them max.
And I will take a limited edition plug and a R2TD also for my sabers, if still available?
Thanks
|
|
|
|
Post by Luke Skywalker on Aug 20, 2013 17:53:44 GMT -5
"These are not the plugs you are looking for."
These plugs are aesthetic and also protect the user from eye burnout with the blade off. These blade plugs aren't made to stay in with the blade attached.
|
|
|
|
Post by Yoran khoor on Aug 20, 2013 18:12:59 GMT -5
well I knew ^^ but I need something the shape of a plug, machined in aluminum or Polycarb to slide the smaller carbon rod.
I have the concept , the ideas but no one to machine the parts, thus my post here to try to work up something with DE
I will BUY BLADE PUGS FOR SURE , THEY ARE AMAZING, THIS LOOK ALIKE A TURBINE IS RAD!
but for now i need to see with DE if he can help me make it happen, then everybody wanting to do some rotoscoping for a fanfilm will have the perfect plug to insert their carbon rod ( sounds kinky, sorry), it's like bringing to the hobby a new tool to go even further in the dream of acting on a jedi film XD.
no?
Y
|
|
|
|
Post by Darkside Engineering on Aug 22, 2013 1:46:26 GMT -5
well I knew ^^ but I need something the shape of a plug, machined in aluminum or Polycarb to slide the smaller carbon rod. I have the concept , the ideas but no one to machine the parts, thus my post here to try to work up something with DE I will BUY BLADE PUGS FOR SURE , THEY ARE AMAZING, THIS LOOK ALIKE A TURBINE IS RAD! but for now i need to see with DE if he can help me make it happen, then everybody wanting to do some rotoscoping for a fanfilm will have the perfect plug to insert their carbon rod ( sounds kinky, sorry), it's like bringing to the hobby a new tool to go even further in the dream of acting on a jedi film XD. no? Y PM sent |
|
|
|
Post by Darth Ryô on Aug 22, 2013 1:52:42 GMT -5
I'm pretty late on this:
LE brass plug, 1.5" long for 1" blade, sanded
(if possible)
I'm sending you a PM for another thing too.
|
|
|
|
Post by sinistar on Sept 8, 2013 19:58:29 GMT -5
Could one of these plugs be used as a pommel plug? Can sound travel through it?
|
|
|
|
Post by sinistar on Sept 8, 2013 20:07:43 GMT -5
I would like one of the LE plugs 1.5" for 1" blade, sanded if possible. if any are still available.
|
|
|
|
Post by ARKM on Sept 8, 2013 21:25:17 GMT -5
Could one of these plugs be used as a pommel plug? Can sound travel through it? Yep. You just have to drill the appropriate sized hole through the white plastic piece that the shaver head rests on. However at that point, it will no longer work well as a blade plug as it will not block/diffuse enough light to be safe to look at when the saber is turned on so no dual-purposing the same plug for both uses, lol.  |
|
|
|
Post by sinistar on Sept 8, 2013 21:56:56 GMT -5
I did not want to dual purpose I wanted to use it for the pommel only. This would be perfect. Do they all look like the one in the picture you showed ARKM?
|
|
|
|
Post by ARKM on Sept 9, 2013 2:30:58 GMT -5
No sir. That's just one I made for a customer way back when. It was for a Saber Forge Gladius. I'm sure Darkside Engineering can make one to suit your tastes... if he feels so inclined to and has the time that is.
|
|
|
|
Post by Fat Ewok on Sept 10, 2013 22:49:46 GMT -5
nevermind for now.
|
|
|
|
Post by aussabers on Sept 19, 2013 11:10:16 GMT -5
1x Limited Edition please
2" long for 1" blades
Sanded
|
|
|
|
Post by theron on Sept 25, 2013 20:41:42 GMT -5
Forum Handle: Theron
Style R2TB
Quantity 1
Blade Plug O.D. 1 inch
Sanding Option yes
Overall Length 1.5 inch
|
|
|
|
Post by jedicri on Sept 28, 2013 10:56:12 GMT -5
1 R2T-Ti, 1" long, sanded
Thanks!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 28, 2013 11:52:19 GMT -5
[1 R2T-Ti, 1" long, sanded]
Ill take one of these too please!!!!
Cant resist, cause when I get a Ti saber, ill need this lol
|
|
|
|
Post by mre1207 on Oct 7, 2013 19:05:37 GMT -5
mre1207--1 R2D2T / 1" O.D. / sanded / 2" long
|
|
|
|
Post by Darkside Engineering on Oct 9, 2013 12:37:15 GMT -5
Quick update the Titanium blade plugs will be coming along soon, I just ordered some better tooling to cut the Titanium more efficiently so as soon as I have the tooling the Ti plugs will be made. All other plugs are good to go though
Caz
|
|
|
|
Post by Turgon on Oct 9, 2013 18:06:27 GMT -5
Put it into the "correct" thread...
1 R2T-Ti, .75" long, heavily sanded
1 R2T-Ti, 1.75" long, heavily sanded
|
|
|
|
Post by Old Ben on Oct 20, 2013 14:58:38 GMT -5
As much as I'd love to get a titanium one, I can't swing that. However, I will order a different one.
Style: R2D2T
Quantity: 1
Blade Plug O.D.: 1"
Sanding Option: Sanded
Overall Length: 1.5"
Quick question, do I need to wait for confirmation, or send the money right away?
|
|
|
|
Post by jedicri on Oct 20, 2013 15:08:54 GMT -5
As much as I'd love to get a titanium one, I can't swing that. However, I will order a different one. Style: R2D2T Quantity: 1 Blade Plug O.D.: 1" Sanding Option: Sanded Overall Length: 1.5" Quick question, do I need to wait for confirmation, or send the money right away? When it is made and is ready to be shipped, Caz will PM you and bill you, and not before. |
|
|
|
Post by Old Ben on Oct 20, 2013 15:15:41 GMT -5
Ah thanks! Really had no idea there |
|
|
|
Post by Saberz.com on Oct 23, 2013 15:10:28 GMT -5
I'd like to order four blade plugs, as follows:
R2T
Quantity: 2
Tubing: 1" OD, 1.5" long, thin-walled, sanded
R2TB
Quantity: 2
Tubing: 1" OD, 1.5" long, thin-walled, sanded
Thank you!
|
|
|
|
Post by Dark Apprentice on Oct 24, 2013 6:46:29 GMT -5
Order for me:
R2T
Qty: 2
1" OD, 1.5" Long, Sanded
R2TB
Qty 1:
1" OD, 2" Long, Sanded
First class mail
|
|
|
|
Post by Vebb Baraka on Nov 25, 2013 17:01:48 GMT -5
Vebb Baraka
R2D2T/1/1" OD/1.5"/sanded
R2TBB/1/1"OD/1.5"/sanded
=) awesome looking plugs
Edit: wasn't sure if brass plugs still available... They were still listed in original post here... If not available let me know and I'll change order.
|
|
|
|
Post by johannes on Nov 30, 2013 15:27:16 GMT -5
Hi!,
Would like to order 2 blade plugs:
R2D2 1" OD, sanded, 1.5"
R2D2TB 1" OD, sanded, 1.5"
Thanks!
Johannes
|
|
